Best Choice Products Oversized Padded Zero Gravity Chair, Folding Outdoor Patio Recliner, XL Anti Gravity Lounger for Backyard w/Headrest, Cup Holder, Side Tray, Polyester Mesh – Tan

Totally Awesome Chair…..with two suggestions
This is the second one I’ve bought. It is really easy to operate, very comfortable, and reasonably priced. I read a post dated July 9th by Sureshoe on this chair and took his advice and have a bit more to add.First, Sureshoe suggested tightening the screws some to prevent the nut from coming off. Great idea. Now, add to that some LocTight/ thread lock compound to the threads exposed as in pic. This will add to the probability of the nut staying on.Second, I took some 3/4” foam pipe insulation (3/4” hole and about 2” in diameter), made a slit along the slit line in the foam tubing and cut four 5” pieces to attach to the corner bottom braces so as to buffer the hard ground or ground irregularities. By protecting the braces this way, the plastic is less likely to wear out or crack. They are attached with two zip ties. Next, I attached about a 20” or so piece of the same foam pipe insulation around the lower part that comes up to meet/hold one’s feet. The pic shows the three zip ties I used…..with…..the pulled out tabs for tightening the zip ties facing downward away from where my legs/feet will rest. Now the chair is, imho, perfect. It rests on padding not wearing out the plastic corner braces, has padding for my feet, and the nuts are more firmly set and less likely to loosen up and fall off.I have owned many of such chairs for camping, porch use, and for hours of sitting at car shows and these are simply THE best I’ve come across.After a while with the “pool noodle like” foam pipe insulation, I replaced them with a denser foam pipe insulation and put a rubber tape on the bottoms to protect the insulation from an abrasive ground. The cheaper pool noodle type foam tended to pop/crush real easily causing me to redo with the denser pipe insulation. I also double rolled with pipe insulation the foot rest so there is no digging into the backs of your legs when resting your feet/legs on it. I used 3/4” ID for the covering of the metal leg piece and 11/4” ID to go over the first covering. Using the next size bigger allows for a more thorough wrap on top of the first. Btw…..when I put the foam on the bar prior to the zip ties, I put rubber cement on the metal bar and the inside of the foam so as to prevent free rolling. I also used rubber cement on the outside of the first foam and on the inside of the second foam all prior to doing up the zip ties. See pics 4-7. This did not take too long to do and is well worth the effort. It also does not cost much to do. Both my chairs have been working great and my long legs no longer get that “dug in” soreness after resting them on the double-padded foot rest while napping in the chair on my porch.Well…..spring is almost here, and my wife decided she wanted one of these too. Yep….I ordered a third chair and got it today. It came quickly and had no damage. I put the lock -tite on the 4 or 5 nuts on each side and it’s ready to go out to the screened in porch soon. Just thought you might like to know that my buying a third one means I really like these. After all, my car show chair (lots of sitting) did half a season last year just wonderfully.

Great chair. Will buy again
Great chair. Very comfortable and easy to open, recline and close. The only drawback I have found is the plastic cup holder they include doesn’t really stay on the chair due to where it attaches to the chair is on the bars that need to move when reclining or closing the chair. I also noticed that along both sides where the chair fabric attaches to the metal, there are rust spots starting to appear.

Great chairs at a great price.
These chairs are perfect for our needs. They’re comfortable, move up and down effortlessly, and easily lock into place.Highly recommended.

The best portable lounge chair!
This is the best portable lounge chair that I have come across: sturdy, comfortable and wide enough so that you can change positions readily. It has two minor faults that can be easily and cheaply remedied. The foot of the lounge is too short, in that it hits me at the back of my ankles, and I am not a tall man. This problem is easily correct by placing a 3/4″ foam pipe insulation (just over $3 at Lowe’s) around the lowest bar. A swimming noodle can also be used, but the pipe insulation is self sealing. Secondly, head cushion is rubbish, as it is too thin, but is easily fixed by a throw pillow. Even with these minor faults, the lounge is fantastic!