Perlegear Long Arm TV Wall Mount for 26-65 inch TVs up to 100 lbs, Corner TV Mount Bracket with 31.65” Extension, Swivel, Tilt Articulating Arms, Max VESA 400x400mm, Full Motion Wall Mount PGMF25B

The perfect solution to protect your investment
What a wonderful product. Maybe this was overkill for my needs (to install a 65 inches TV of less than 40 pounds on a concrete column) but it gave me the confident that I won’t have any issues whatsoever. Of course I didn’t used the provided plastic wall anchors but instead bought some lead ones. The installation was really easy thank to the well written and provide instructions. The sturdiness of the product it’s great, really good quality here and there’s zero (none) tiltability. The size is perfect for my application and I can certainly swivel without any issue giving me access to my network devices which all are behind the TV now.The installation was done more than a month ago and I’d been walking behind the TV several times now, swiveling from one side to the other without any problem.The TV it’s perfect leveled, the images below can be deceiving on this matter.The only thing that I would take into consideration for a new installation would be to install the mount in a way that the hinge get hide behind the TV.

Excellent Wall Mount
Good quality. Sturdy. Easy to install. Using it on a 55 inch OLED. Great range of motion. Good price.

Heavy duty with great adjustment
I ordered this TV mount after looking at several others on Amazon. I felt it had the best options, price and was delivered early in the morning after my late night order!I got right into installing it. Most of the install work was done in about 20 minutes and the TV was up. Drilled three holes for the wall mount and attached the TV brackets. Read on for the issues I had later. The TV mount is a heavy duty unit. Installed it using a single wood stud. Comes with a large assortment of hardware to fit various installation needs, but it didn’t include the correct size bolts to mount the brackets to the back of my TV. Luckily, I was replacing an existing mount and re-used those bolts. This is obviously a universal mount, as such, the mount could obstruct connection panels on the TV. And that’s what happened to me. One of the cross members ended up blocking the access to a connections panel. I ended up removing the TV and the upper and lower cross members on the right side. I used my hack saw to cut a few inches off the cross members to gain access. No big deal, just an issue to deal with. What I particularly liked is that I could put and take it down the TV by myself. Just catch the TV mounted brackets on the top cross member and then screw the holding brackets on the bottem cross members. Overall, I’m very happy with the mount, it has the options I needed at a great price. Easy to adjust the tilt, after the TV is installed. Much harder to adjust the level, but once that’s done you should never need to adjust it again. I made this adjustment by placing a level on a cross member. Easier to do without the the TV mounted, so your not working around a TV.

Excellent value, very capable and easy to install (once stud is located)
This is a capable mount that is an excellent value for the price.It stands out from other options because it is mounted to a single stud instead of two studs, which makes for simpler installation and a less obtrusive base hanging from the wall.The action on the mount’s arms provides for a significant range of positions, both in and out and left and right, allowing for the TV to be positioned a fairly significant distant from where the mount is fastened to the wall.The only shortcoming, if there is one, is that when the mount’s arms are folded flat against the wall, the TV can only be slide left or right by a small distance (maybe 6 or 8 inches in either direction). But, this one limitation is trivial given the range of other movements that are possible with this design.The mount is sturdy when fastened squarely into a wood stud. It squeaks a little bit with large movements from the mount plate compressing the drywall between the plate and the stud, but that’s expected and not a big deal. Further tightening may resolve that, but I didn’t want to put a permanent dent in where the mounting plate contacts the drywall by over-tightening.The included mini level is a nice touch and certainly appreciated, as it comes in handy as a picture leveler and similar.

It’s what I wanted