USX Mount Full Motion TV Wall Mount for Most 42-86 inch Flat Screen/LED/4K, TV Mount Bracket Dual Swivel Articulating Tilt 6 Arms, Max 16″ Wood Studs, VESA 600x400mm, Holds up to 132lbs

Go for the the USX mount, perfect!
I have to say, this was one of the most well-thought-out products I’ve ever purchased. The item arrived well packaged in a sturdy box (inside another Amazon box) with everything well laid out inside. All of the fasteners were individually packaged so there’s no fishing around for the right part. For the record, I used this to mount a 65″ TV that weighs about 50 lbs. It is definitely sturdy and can hold much more.Additional tools you will need: Tape measure, stud-finder, drill w/drill and screwdriver bits, wrench & socket set (SAE).Mounting on the wall was a breeze. My advice to other buyers that you will need to locate the wall studs accurately and you will need drill the pilot holes as close to the center of the studs as possible – particularly if you’re mounting a heavy TV. There’s just no getting around that. Use the “stud-finder” to mark the edges of the studs, then use those marks to determine the mid-point. Make a couple of passes to be absolutely sure. Included in the package is a peal-and-stick cardboard template and two bubble levels. Don’t bother with the one that you’re supposed to stick on the template, just use the big plastic one. You’re going to want to do some measuring here to make sure you place the mount exactly where you want it. I was lucky that the center of the TV was almost dead-center between two studs. You’ll also want to measure the height of the mount by test-fitting the part that goes on the TV and doing a little figuring on how much to move the mount up or down so that the TV is where you want it.Once you’ve drilled the holes, screw the bracket to the wall and use a wrench to snug the screws tight. Don’t over-tighten or you’ll strip out the holes. Make sure you put the mount right side up (Yes, I made this mistake). Next, attach the brackets to the TV. The kit comes with an assortment of screws, washers and bushings to accommodate any TV. Each TV is different and you’re just going to have to use common sense. Don’t over-tighten these screws either, but the brackets need to be snug.Before hanging the TV on the wall mount, ensure that the side-to-side and front-to-back tilt adjustment screws are tight and relatively level. You can adjust them later to get them perfect, but you should have them close to where they need to be now and tightened down so the mount doesn’t move when you’re trying to hang the TV on it. Have someone help you lift the TV onto the wall mount. It just hangs on there (at first), but it’s much easier if you have someone to help guide it into place. Attach the locking brackets to the bottom of the TV brackets and you’re done!!!Operation of the mount is very smooth, though it takes just a little bit more effort than I’d like. I attribute that to the fact that it’s brand new and I’m certain a few drops of oil strategically placed will resolve that. BY NO MEANS would I suggest getting a different mount based on that purely-subjective opinion. This mount is perfect for a big TV. It’s a little pricier than most, but worth every penny.Read less

I can’t say enough good words about this one!
I bought one of these for my 32 inch tv. I was concerned it would be too big for that TV size, but it actually looks really good. Then I bought another one for my 55 inch TV, and just installed it.LOVE these mounts! My plan is to upgrade the 55 incher to a bigger one at some point, and move the old one to where the 32 incher is. Bought the same mounts for consistency and to avoid issues when moving and installing the different TVs on the wall. Got a really good price for them, so I am super happy.I honestly can’t understand why some companies charge hundreds of dollars for a TV mount these days when these are absolutely perfect and are so decently priced.They are really well thought out and manufactured. Sturdy, reliable and easy to install. Great for both light and heavy TVs. Very high quality materials – a nice surprise here. They work equally well for 12 and 16-inch distanced vertical studs. The paper sheet which comes in the box makes markings on the wall and aligning everything super easy.The mount itself can be tilted both vertically and horizontally. In case the installation of the base of the mount isn’t perfectly leveled on the wall, you can further level your TV from the front of the mount.The wrench/screw driver which comes with the kit is kind of useless (poor materials – you can’t tighten anything with it – it’s too soft) but I would assume you have your own decent quality wrench and screw driver. You’d also need a drill and a decent ratchet or a wrench to securely tighten the mount on the wall. Depending on your TV, you might also need special screws to attach the brackets to the back of the TV. This kit comes with several of the most popular size screws, but my old Sony required different ones. Thankfully, a quick run to Home Depot solved the issue.Needless to say, I am super happy with these mounts, and would recommend them to anybody planning to install their 32-80 inchTV on the wall. Happy shopping 😊

Strong, Sturdy, & very Adjustable
This TV Mount is very sturdy and my handyman stated the installation instructions were very clear. The Mount moves easily and appreciated that it could be adjusted to center over the existing cabinet beneath it. My 65” TV looks great on my Family Room wall. I like it can support up to a 85” TV should I need to replace and upgrade to a larger TV screen.

La verdad quede demasiado satisfecho con el producto desde la entrega inmediata en pocos días hasta el producto en si,es resistente fácil de colocar y tiene un Manual de guía para que te vayas guiando como debe de ir colocado,también tiene en el Manual tornillos que van con números para que sepas bien donde va cada uno,excelente compra no lo pienses tanto en adquirirla….

Me parece un producto de buena calidad